skip navigation

How to apply

Heat transfer directions

  • Remove protective plastic backing from transfer.

    Remove protective plastic backing from transfer.

  • Remove protective plastic backing from transfer.

    Place transfer motif on garment or fabric. Place apress cloth or light fabric over the motif if desired

  • Remove protective plastic backing from transfer.

    MAke certain the temperature and pressure are appropriate(see chart below)

  • Remove protective plastic backing from transfer.

    After applying the transfer once, remove stickly film and discard.

  • Remove protective plastic backing from transfer.

    Reapply heat again using same temperature, pressure and press cloth

  • Remove protective plastic backing from transfer.

    The transfer should now be permanently sealed onto your fabric. when applied properly, it is washable and drycleanable.

Chart

FINE FABRICS (sill, polysilk, lycra) HEAVY FABRICS (jersey, fleece, denim)
  • Temperature : 325-340F
  • Pressure: Light(25-35 lbs)
  • Time : 7-10 seconds
  • Temperature : 350F
  • Pressure: Light to midium (30-40 lbs)
  • Time : 10-12 seconds
  • Remove Clear film
  • Reapply heat for additional 7-10 seconds
  • Remove Clear film
  • Reapply heat for additional 10-12 seconds
NOTE

We recommed using a protective pad between layers of fabric to prevent adhesive from gluing the fabric together.
Pre-test dark colors or non-reactive dyed fabrics for color change from heat.